PROFAB Hydraulic Shears for sheet metal


H-12014, 10' - 14 Gauge
  • Spring Hold Downs
  • Two 24" front support arms
  • 24" manual back gauge with wheel
  • Safety full length finger guard
  • High grade, high carbon/chrome
  • Toolbox and leveling pads
  • 2-edge upper blade and 4-edge bottom blade, 60 hrc.
  • Two 14" side gauges (R/L) with dual scales
  • Removable foot control pedal with safety protection
  • Fully hydraulic control and safety protection system
  • Electric control selection for single/continuous mode
  • Deluxe rear operated back gauge parallel motion hand wheel
  • 24" back gauge
  • 24" front gauge
  • Optional Equipment - 40"/54"/79"/118" squaring arms
Model Cutting Length Cutting Mild Steel Cutting Stainless Steel Rake Angle Strokes Per Minute Motor Power Shipping Weight Packing Size
H-5216 52" 16 Ga. 19 Ga. 1° 40' 20 2 HP 1,600 lbs. 75" x 36" x 53"
H-5214 52" 14 Ga. 18 Ga. 1° 40' 35 3 HP 1,900 lbs. 75" x 36" x 53"
H-5210 52" 10 Ga. 13 Ga. 1° 40' 30 5 HP 3,000 lbs. 76" x 36" x 55"
H-6014 61" 14 Ga. 18 Ga. 1° 40' 30 5 HP 3,200 lbs. 84" x 36" x 55"
H-6010 61" 10 Ga. 13 Ga. 1° 40' 26 5 HP 3,500 lbs. 84" x 36" x 55"
H-8014 81" 14 Ga. 18 Ga. 1° 40' 26 5 HP 3,700 lbs. 105" x 36" x 55"
H-8010 84" 10 Ga. 13 Ga. 1° 40' 24 5 HP 4,000 lbs. 105" x 36" x 55"
H-10014 100" 14 Ga. 18 Ga. 1° 30' 22 5 HP 4,300 lbs. 126" x 36" x 55"
H-10012 100" 12 Ga. 15 Ga. 1° 30' 22 5 HP 4,800 lbs. 126" x 36" x 55"
H-10010 100" 10 Ga. 13 Ga. 1° 30' 22 7.5 HP 5,500 lbs. 128" x 36" x 55"
H-12014 122" 14 Ga. 18 Ga. 1° 30' 20 5 HP 5,800 lbs. 152" x 36" x 55"